IndustrialENET | Industrial Ethernet Products and Solutions

1. Name:

2. Company Name:

3. Email Address:

4. Phone Number:

5. Please describe briefly the application? Example: SCADA System for City wide Wastewater System or Real-time Control over Ethernet for Wafer Fab facility, Chemical Skid to be connected to DCS, Traffic Monitoring Video over IP, Industrial IP Telephones, Etc.

6. Provide a list of the types of devices and their Ethernet Port connection type (TX RJ45, FX Multi-mode, FX Single Mode, 802.11g or 802.11b Wireless); including the make and models if you know, you will be connecting into the network? Example: PLC, DCS System, AC or DC Drives, GUI or Man Machine Interface, Data Server, Video over IP Cameras, IP Intercom System, IP Telephone, Etc.

7. Number or approximate number of the above devices to be connected to the network?

8. Preferred type of Network? (check all that apply)

A	Multiple Switch Nodes, Industrial Switches, Ring Redundancy Capable, Fiber Optic Backbone, Single Mode (capable of up to 50 Switch Nodes and from 0-120 Kilometers between each node) See Example
B	Multiple Switch Nodes, Industrial Switches, Ring Redundancy Capable, Fiber Optic Backbone, Multi Mode (capable of up to 50 Switch Nodes and from 0-5000 Meters between each node) See Example
C	Multiple Switch Nodes, Industrial Switches, Ring Redundancy Capable, Fiber Optic Backbone with Multi-Mode and Single-Mode Fiber, Multi Mode (capable of up to 50 Switch Nodes and from 0-5000 Meters between each node) and Single Mode (capable of up to 50 Switch Nodes and from 0-120 Kilometers between each node) See Example
D	Multiple Switch Nodes, Industrial Switches, Ring Redundancy Capable, Cat 5 or Cat 6 Copper Backbone (capable of up to 50 Switch Nodes and from 0-100 Meters between each node) See Example
E	Standalone switch/s connected to all devices, management required See Example
F	Standalone switch/s connected to all devices, management not required See Example
G	Peer to Peer Cat 5 - no redundancy required See Example
H	Peer to Peer Fiber Multi Mode See Example
I	Peer to Peer Fiber Single Mode See Example
J	Point to Point Wireless 802.11b or 802.11g See Example
K	Point to Multi-Point Wireless 802.11b or 802.11g See Example

If multiples please briefly describe?

9. There are the possibility of many different Ethernet Switch configurations. This part of the questionnaire is intended to differentiate how many instances of each of these node types are required. Select up to 10 different node type configurations. For example: 4 of the network nodes may require 8 RJ45 Ports for device connections, while 3 others may require 16? So, in this case you would select 2 node types. Please Contact Us if you need assistance with this very important part of our questionnaire.

1 2 3 4 5 6 7 8 9 10 none

Please fill in the following Ethernet switch node type information.
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(10-70 Kilometers) Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(44-120 Kilometers) Gigabit Only and up to 4 Ports

Please fill in the following Ethernet switch node type information (for each node).
Node Type Category
Number of Instances of this node type
Ring Redundancy Required	See Example
Redundant Ring Coupling Required	(This means you intend to redundantly couple multiple rings together) See Example
Dual Redundant Ring Redundancy Required	See Example
Redundant Backbone Transmission Rate	if applicable (100MB or 1000MB)
Management Required	NOTE: The answer is Yes if redundancy is required or using, Link Aggregation, SNMP, PTP, VLAN, IGMP, RSTP, Auto Negotiation, etc.
Ambient Conditions Required	Example 0-60 C
Number of TX RJ45 Ports Required including backbone Ports if needed	10/100MB Only
Number of FX Multi-mode Ports required including backbone ports if needed	(0-5000 meters) 100MB only
Number of FX Single-Mode Ports Required (0-32.5 Kilometers)	100MB only
Number of Single-Mode Ports required including backbone ports if needed	(24-86 Kilometers)
Number of TX RJ45 Ports required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Multi Mode Ports Required including backbone ports if needed	Gigabit Only and up to 4 Ports
Number of Single Mode Ports Required including backbone ports if needed	(0-20 Kilo